微信跳一跳自动运行python脚本

'''import os import sys import subprocess import time import math from PIL import Image import random from six.moves import input import debug, config import numpy as np

VERSION = "1.1.1"

debug_switch = False # debug 开关，需要调试的时候请改为：True config = config.open_accordant_config()

# Magic Number，不设置可能无法正常执行，请根据具体截图从上到下按需设置，设置保存在 config 文件夹中under_game_score_y = config['under_game_score_y']press_coefficient = config['press_coefficient'] # 长按的时间系数，请自己根据实际情况调节piece_base_height_1_2 = config['piece_base_height_1_2'] # 二分之一的棋子底座高度，可能要调节piece_body_width = config['piece_body_width'] # 棋子的宽度，比截图中量到的稍微大一点比较安全，可能要调节

screenshot_way = 2

def pull_screenshot():'''新的方法请根据效率及适用性由高到低排序'''global screenshot_way if screenshot_way == 2 or screenshot_way == 1:process = subprocess.Popen('adb shell screencap -p', shell=True, stdout=subprocess.PIPE) screenshot = process.stdout.read() if screenshot_way == 2:binary_screenshot = screenshot.replace(b'\r\n', b'\n') else:binary_screenshot = screenshot.replace(b'\r\r\n', b'\n') f = open('autojump.png', 'wb') f.write(binary_screenshot) f.close() elif screenshot_way == 0:os.system('adb shell screencap -p /sdcard/autojump.png') os.system('adb pull /sdcard/autojump.png .')

def set_button_position(im):'''将 swipe 设置为 `再来一局` 按钮的位置'''global swipe_x1, swipe_y1, swipe_x2, swipe_y2 w, h = im.size left = int(w / 2) top = int(1584 * (h / 1920.0)) left = int(random.uniform(left-50, left+50)) top = int(random.uniform(top-10, top+10)) # 随机防 ban swipe_x1, swipe_y1, swipe_x2, swipe_y2 = left, top, left, top

def jump(distance):'''跳跃一定的距离'''press_time = distance * press_coefficient press_time = max(press_time, 200) # 设置 200ms 是最小的按压时间press_time = int(press_time) cmd = 'adb shell input swipe {x1} {y1} {x2} {y2} {duration}'.format(x1=swipe_x1,y1=swipe_y1,x2=swipe_x2,y2=swipe_y2,duration=press_time) print(cmd) os.system(cmd) return press_time

def find_piece_and_board(im):'''寻找关键坐标'''w, h = im.size

piece_x_sum = 0 piece_x_c = 0 piece_y_max = 0 board_x = 0 board_y = 0 scan_x_border = int(w / 8) # 扫描棋子时的左右边界scan_start_y = 0 # 扫描的起始 y 坐标im_pixel = im.load()# 以 50px 步长，尝试探测 scan_start_y for i in range(int(h / 3), int(h*2 / 3), 50):last_pixel = im_pixel[0, i]for j in range(1, w):pixel = im_pixel[j, i]# 不是纯色的线，则记录 scan_start_y 的值，准备跳出循环if pixel[0] != last_pixel[0] or pixel[1] != last_pixel[1] or pixel[2] != last_pixel[2]:scan_start_y = i - 50 break if scan_start_y:break print('scan_start_y: {}'.format(scan_start_y))

# 从 scan_start_y 开始往下扫描，棋子应位于屏幕上半部分，这里暂定不超过 2/3 for i in range(scan_start_y, int(h * 2 / 3)):for j in range(scan_x_border, w - scan_x_border): # 横坐标方面也减少了一部分扫描开销pixel = im_pixel[j, i]# 根据棋子的最低行的颜色判断，找最后一行那些点的平均值，这个颜色这样应该 OK，暂时不提出来if (50 < pixel[0] < 60) and (53 < pixel[1] < 63) and (95 < pixel[2] < 110):piece_x_sum += j piece_x_c += 1 piece_y_max = max(i, piece_y_max)

if not all((piece_x_sum, piece_x_c)):return 0, 0, 0, 0 piece_x = int(piece_x_sum / piece_x_c) piece_y = piece_y_max - piece_base_height_1_2 # 上移棋子底盘高度的一半

# 限制棋盘扫描的横坐标，避免音符 bug if piece_x < w/2:board_x_start = piece_x board_x_end = w else:board_x_start = 0 board_x_end = piece_x

for i in range(int(h / 3), int(h * 2 / 3)):last_pixel = im_pixel[0, i]if board_x or board_y:break board_x_sum = 0 board_x_c = 0

for j in range(int(board_x_start), int(board_x_end)):pixel = im_pixel[j, i]# 修掉脑袋比下一个小格子还高的情况的 bug if abs(j - piece_x) < piece_body_width:continue

# 修掉圆顶的时候一条线导致的小 bug，这个颜色判断应该 OK，暂时不提出来if abs(pixel[0] - last_pixel[0]) + abs(pixel[1] - last_pixel[1]) + abs(pixel[2] - last_pixel[2]) > 10:board_x_sum += j board_x_c += 1 if board_x_sum:board_x = board_x_sum / board_x_c last_pixel = im_pixel[board_x, i]

# 从上顶点往下 +274 的位置开始向上找颜色与上顶点一样的点，为下顶点# 该方法对所有纯色平面和部分非纯色平面有效，对高尔夫草坪面、木纹桌面、药瓶和非菱形的碟机（好像是）会判断错误for k in range(i+274, i, -1): # 274 取开局时最大的方块的上下顶点距离pixel = im_pixel[board_x, k]if abs(pixel[0] - last_pixel[0]) + abs(pixel[1] - last_pixel[1]) + abs(pixel[2] - last_pixel[2]) < 10:break board_y = int((i+k) / 2)

# 如果上一跳命中中间，则下个目标中心会出现 r245 g245 b245 的点，利用这个属性弥补上一段代码可能存在的判断错误# 若上一跳由于某种原因没有跳到正中间，而下一跳恰好有无法正确识别花纹，则有可能游戏失败，由于花纹面积通常比较大，失败概率较低for l in range(i, i+200):pixel = im_pixel[board_x, l]if abs(pixel[0] - 245) + abs(pixel[1] - 245) + abs(pixel[2] - 245) == 0:board_y = l+10 break

if not all((board_x, board_y)):return 0, 0, 0, 0

return piece_x, piece_y, board_x, board_y

def check_screenshot():'''检查获取截图的方式'''global screenshot_way if os.path.isfile('autojump.png'):os.remove('autojump.png') if (screenshot_way < 0):print('暂不支持当前设备') sys.exit() pull_screenshot() try:Image.open('./autojump.png').load() print('采用方式 {} 获取截图'.format(screenshot_way)) except Exception:screenshot_way -= 1 check_screenshot()

def yes_or_no(prompt, true_value='y', false_value='n', default=True):default_value = true_value if default else false_value prompt = '%s %s/%s [%s]: ' % (prompt, true_value, false_value, default_value) i = input(prompt) if not i:return default while True:if i == true_value:return True elif i == false_value:return False prompt = 'Please input %s or %s: ' % (true_value, false_value) i = input(prompt)

def main():'''主函数'''op = yes_or_no('请确保手机打开了 ADB 并连接了电脑，然后打开跳一跳并【开始游戏】后再用本程序，确定开始？') if not op:print('bye') return print('程序版本号：{}'.format(VERSION)) debug.dump_device_info() check_screenshot()

i, next_rest, next_rest_time = 0, random.randrange(3, 10), random.randrange(5, 10) while True:pull_screenshot() im = Image.open('./autojump.png')# 获取棋子和 board 的位置piece_x, piece_y, board_x, board_y = find_piece_and_board(im) ts = int(time.time()) print(ts, piece_x, piece_y, board_x, board_y) set_button_position(im) jump(math.sqrt((board_x - piece_x) ** 2 + (board_y - piece_y) ** 2)) if debug_switch:debug.save_debug_screenshot(ts, im, piece_x, piece_y, board_x, board_y) debug.backup_screenshot(ts) i += 1 if i == next_rest:print('已经连续打了 {} 下，休息 {}s'.format(i, next_rest_time)) for j in range(next_rest_time):sys.stdout.write('\r程序将在 {}s 后继续'.format(next_rest_time - j)) sys.stdout.flush() time.sleep(2) print('\n继续') i, next_rest, next_rest_time = 0, random.randrange(30, 100), random.randrange(10, 60) time.sleep(np.random.uniform(0.6,0.9)) # 为了保证截图的时候应落稳了，多延迟一会儿，随机值防 ban

if __name__ == '__main__':main()

import numpy as np import cv2 import os import time import re

# 屏幕截图def pull_screenshot(path):os.system('adb shell screencap -p /sdcard/%s' % path) os.system('adb pull /sdcard/%s .' % path)

# 根据x距离跳跃def jump(distance, alpha):press_time = max(int(distance * alpha), 200)

cmd = 'adb shell input swipe {} {} {} {} {}'.format(bx1, by1, bx2, by2, press_time) os.system(cmd)

screenshot = 'screenshot.png'alpha = 0 bx1, by1, bx2, by2 = 0, 0, 0, 0 chess_x = 0 target_x = 0

fix = 1.6667

# 检查分辨率是否是960x540 size_str = os.popen('adb shell wm size').read() if size_str:m = re.search(r'(\d+)x(\d+)', size_str) if m:hxw = "{height}x{width}".format(height=m.group(2), width=m.group(1)) if hxw == "960x540":fix = 3.16

while True:pull_screenshot(screenshot) image_np = cv2.imread(screenshot) image_np = cv2.cvtColor(image_np, cv2.COLOR_BGR2RGB) gray = cv2.Canny(image_np, 20, 80)

HEIGHT = image_np.shape[0]WIDTH = image_np.shape[1]

bx1 = WIDTH / 2 bx2 = WIDTH / 2 by1 = HEIGHT * 0.785 by2 = HEIGHT * 0.785 alpha = WIDTH * fix

# 获取棋子x坐标linemax = []for i in range(int(HEIGHT * 0.4), int(HEIGHT * 0.6)):line = []for j in range(int(WIDTH * 0.15), int(WIDTH * 0.85)):if image_np[i, j, 0] > 40 and image_np[i, j, 0] < 70 and image_np[i, j, 1] > 40 and image_np[i, j, 1] < 70 and image_np[i, j, 2] > 60 and image_np[i, j, 2] < 110:gray[i, j] = 255 if len(line) > 0 and j - line[-1] > 1:break else:line.append(j)

if len(line) > 5 and len(line) > len(linemax):linemax = line if len(linemax) > 20 and len(line) == 0:break

chess_x = int(np.mean(linemax))

# 获取目标x坐标for i in range(int(HEIGHT * 0.3), int(HEIGHT * 0.5)):flag = False for j in range(WIDTH):# 超过朋友时棋子上方的图案if np.abs(j - chess_x) < len(linemax):continue if not gray[i, j] == 0:target_x = j flag = True break if flag:break

# 修改检测图gray[:, chess_x] = 255 gray[:, target_x] = 255# 保存检测图cv2.imwrite('detection.png', gray)

print(chess_x, target_x) jump(float(np.abs(chess_x - target_x)) / WIDTH, alpha)